100 Volt Line Tappings 3W = 3.3KΩ , 6W = 1.7KΩ
70 Volt Line Tappings 1.5W = 3.3KΩ , 3W = 1.7KΩ

Push fit terminals to accept up to 4mm cables

100 Volt Line Tappings 0.8W = 13KΩ, 1.5W = 6.7KΩ, 3W = 3.3KΩ , 6W = 1.7KΩ
70 Volt Line Tappings 0.4W = 13KΩ, 0.75W = 6.7KΩ, 1.5W = 3.3KΩ , 3W = 1.7KΩ

Push fit terminals to accept up to 4mm cables

Push fit terminals to accept up to 4mm cables

The CL-1TD is a 5 1/2" ceiling speaker with a silk dome tweeter mounted in a 110 degree horn. It has a black metal enclosure for fire protection and can be mounted in a ceiling hole with the option of a safety wire hanger.

Connections are via a terminal block which has two + and two - terminals to facilitate daisy chaining.

Tappings are changed by a function selector mounted on the rear of the dome

100 Volt Line Tappings 1.5W = 6.7KΩ, 3W = 3.3KΩ , 6W = 1.7KΩ
70 Volt Line Tappings 0.75W = 6.7KΩ, 1.5W = 3.3KΩ , 3W = 1.7KΩ

The CL-2TD is a 6 1/2" ceiling speaker with a silk dome tweeter mounted in a 110 degree horn. It has a black metal enclosure for fire protection and can be mounted in a ceiling hole with the option of a safety wire hanger.

Connections are via a terminal block which has two + and two - terminals to facilitate daisy chaining.

Tappings are changed by a function selector mounted on the rear of the dome

100 Volt Line Tappings 10W = 1KΩ, 20W = 500Ω , 30W = 250Ω
70 Volt Line Tappings 5W = 1KΩ, 10W = 500Ω , 20W = 250Ω

The CL-3TD is a 8" ceiling speaker with a silk dome tweeter mounted in a 110 degree horn. It has a black metal enclosure for fire protection and can be mounted in a ceiling hole with the option of a safety wire hanger.

Connections are via a terminal block which has two + and two - terminals to facilitate daisy chaining.

Tappings are changed by a function selector mounted on the rear of the dome

100 Volt Line Tappings 15W = 667Ω, 30W = 333Ω , 60W = 167Ω
70 Volt Line Tappings 7.5W = 667KΩ, 15W = 333Ω , 30W = 167Ω

When a small aesthetically pleasing, superb sounding background music system is needed the BootiQue is the perfect choice. Whether the required system is small or large BootiQue is infinitely flexible to meet all needs.

All hardware needed is included in a system. 1 x Subwoofer, 8 x Satellites, 8 x BWB bracket, 1 x remote control, 1 x wall control panel.

The main unit includes connections for all music sources. The wall control panel allows for easy connectivity and allows the sub to be placed out of sight, thus it can be heard and not seen.

Featuring an auto power facility which shuts down the system when no signal is present. The Input sensitivity selector ensures that a range of signal sources can be used including CD, computer or MP3.

A fire alarm mute connector enables the BootiQue to be installed into a location covered by a voice alarm fire system with a choice of voltage-on or voltage-off muting. An optional wall mounting switch plate which has on/off switch, USB and phono inputs and links connected through CAT 5 to the amplifier unit allowing the Sub to be remotely located in the venue.
Finished in high gloss black or white piano finish, the BootiQue will complement the most sophisticated of interiors, as it's name suggests it is ideal for distributed sound in Boutiques, bars, Discotheque Lounge Areas, Foyers and Home Cinema.

Optional Hardware: BWB,  SWB, HWB

Shattering performance in a remarkably compact enclosure delivering a maximum SPL of 126dB and impressive bass relative to its size.

Equipped with a 10" heavy duty woofer and 1" high Frequency driver, this enclosure is an adaptable professional choice for both mobile and fixed installation.

The use of specially selected driver components offer excellent performance for stand-alone AV and voice critical situations or seamless mid-high operation when used with the BR-218B in a sub/sat system.

Many world class Discotheques have utilised central clusters and periphery cabinets on dance floors with great effect.

Hardware fitted as standard: TH-1, CFPK
Optional Hardware: LWB, W-SA, SS-1, CFEK
Connector Option: EP-5A

Equipped with a 12" woofer and 1½" high Frequency driver, the BR-12 is capable of extremely high SPL and enhanced bass, given it's compact dimensions.  BR-12 is an adaptable professional choice loudspeaker for both mobile and fixed installation applications.

The use of specially selected driver components offer excellent performance for stand-alone AV and voice critical situations or seamless mid-high operations when used with the BR-218B as a sub/sat system.

The new rotatable horn will add to this cabinets versatility.

Hardware fitted as standard: TH-1, CFPK
Optional Hardware: LWB, W-SA, SS-1, CFEK
Connector Option: EP-5A

Easily concealed, the HGW-10 can be multi stacked hidden against a wall forming a pillar. Firing into a corner further enhances the bass performance.

Designed in the 1990's to satisfy the needs of the "super clubs", the OHM SMAKSTAK became a legend throughout dance club world.

As part of our thirty year celebrations we have brought back this iconic speaker with an all new Ohm driver.

The SS-30 has a folded horn length of 2.7 meters made in birch ply within an enclosure of less than half a cubic meter. The single 16 ohm, 400 watt driver gives a phenomenal SPL in excess 138dB (144dB stacked in multiples of four) with a -3dB low Frequency point of 32Hz and will be an ideal companion for the Ersa Major line array.

The purpose designed flying system is easy to use and in transport has no protruding parts that can be lost or broken off. The cabinets can equally be used singly or in pairs using the unique stand adaptor or hanging cradle for smaller systems, perfect for conferencing or low profile wide angle room applications.

A wide range of options is available for various configurations. The cabinets are fitted with twin Neutrik Speakons allowing for easy daisy chaining and a HF attenuation switch for single or multiple cabinet use.

Optional Hardware: EMN-FF,   BR-7SA

LUNARAY line-array is a compact full range enclosure housing a 1" compression driver and an 8" bass/mid driver, combined with some very clever engineering to make a product with a difference.

It is designed to be used in theatres, opera or mobile speech / sound applications. It may be cradle mounted for use as single enclosures and there is a dedicated line array flying system available.

For FLAT array, axis of drivers in adjacent cabinets are parallel (i.e. angle of 0 degrees between axis). For BANANA array, constant angle offset sustained throughout the array, 20 degrees between axis of drivers in adjacent cabinets. Maximum offset possible (last pair in the array), 30 degrees between axis of adjacent drivers. Offset between adjacent driver axis in controllable in 2.5 degree steps up to 20 degrees. The very compact enclosure's lowest reproduceable Frequency is still 75Hz at -3dB with a maximum sound pressure level of 126dB!

Optional Hardware: LA-WC, L-FS, L-FF
Connector Option: EP-5A

It uses a 15" 3" voice coil bass driver and a 1½" compression driver mounted on a 60° x 40° horn flare.

Applications include stage monitors and front of house. The versatility of this cabinet allows it to be used as a full range system or within a two way system as the mid highs for a sub/sat system.

Hardware fitted as standard: TH-1, CFPK
Optional Hardware: LWB, W-SA, SS-1, CFEK
Connector Option: EP-5A
Flight cases TRS-X Cases

Pre-fitted for ST-CP castor pack. These can be factory or retro fitted for use with the TRS-218TD transport dolly.

Recommended Controller CRED Mk2

Optional Hardware: ST-CP
Connector Option: EP-5A

For Three way operation, bi-amp modules can be factory fitted to the TRS-212 cabinets. Compatible for use with the TRS-218 Subwoofer in a sub/sat system.

Recommended controller CRED Mk2

Hardware fitted as standard: CFPK
Optional Hardware: CFEK
Connector Option: EP-5A

Loaded with four high power 18" 4" voice coil cast chassis drivers in a sixth order compound band pass design, provides an awesome, robust platform for the rest of the HD system.

Both LB-Series cabinets feature a paper cone high Frequency unit coupled to a 5¼” Bass unit in the LB-1 and 8” Bass unit in the LB-3. The heavy duty paint finished cabinet features a powder coated metal grill embellished with the OHM chrome logo. Connections are by way of the proprietary OHM backplate featuring twin binding posts for use with hard wiring or Pomona Plugs.

Variable compatible hardware is available within the OHM range, this can be fitted to the cabinets by using the pre-prepared fixing points. An additional ‘second fix’ threaded bush is available to meet local installation by-laws.

Optional Hardware LB-1: KC-1, SWB
Optional Hardware LB-3: LB-3C, SWB

The Birch plywood painted cabinet is fitted with twin Neutrik Speakon® compatible connectors allowing for easy daisy chaining, a foam covered kick proof grill and heavy duty bar handles making this a truly roadworthy product. It is also suitable for use as a DJ monitor.

A must for every engineers arsenal of loudspeakers, easily set up and an attractive piece of stage furniture.

Hardware fitted as standard: Threaded Mounting Plate
Optional Hardware:  TP-1